[CCNP 642-832 TSHOOT ] [ A guide for the TSHOOT Exam ] CCNP TS Tickets 문제

Below is a summary of 14 Tickets you will see in the exam:

% CCNP TS 에서는 R&S와 달리 Command 를 통하여 설정 값을 변경하는것이 아닌 "show" , "ping" 명령을 통해

어느 장비가 문제이고, 원인이 무엇이며, 해결 방법을 객관식으로 물어보는 Ticket 문제가 출시되고 있습니다.

+ 13/14 Troubleshooting Tickets (check them at the right-side menu)

% 총 14개의 Tickets 문제가 있으며 그 중에 13개의 문제가 출시되고 있습니다.

Device	Error Description
ASW1	1. Access port not in VLAN 10
	2. Port Channel not allowing VLAN 10
	3. Port Security
DSW1	1. HSRP track 10
	2. VLAN filter
R1	1. Wrong IP of BGP neighbor
	2. NAT – Access list mis-configured
	3. WAN access-list statement missing
	4. OSPF Authentication
R2	1. IPv6: enable OSPF
R4	1. EIGRP – wrong AS
	2. Redistribute (“to” & -> )
	3. DHCP Range mis-configured
	4. EIGRP Passive Interface

 

Notice that in the exam, the tickets are randomly given so the best way to troubleshooting is to try pinging to all the devices from nearest to farthest from the client until you don’t receive the replies.

In each ticket you will have to answers three types of questions:

+ Which device causes problem
+ Which technology is used
+ How to fix it

One more thing to remember: you can only use “show” commands to find out the problems and you are not allowed to make any changes in the configuration. In fact, in the exam you can not enter the global configuration mode!

Screenshots for your reference: